News

Actions

NASA: New Mars Rover beams back images showing its descent

Posted at 7:33 AM, Aug 07, 2012
and last updated 2012-08-07 07:34:33-04

PASADENA, Ca. (NASA/JPL) - Earlier today, just hours after NASA's Curiosity rover landed on Mars, a select group of images taken by the onboard Mars Descent Imager, or MARDI, were beamed back to Earth. The 297 color, low-resolution images, provide a glimpse of the rover's descent into Gale Crater. They are a preview of the approximately 1,504 images of descent currently held in the rover's onboard memory. When put together in highest resolution, the resulting video is expected to depict the rover's descent from the moment the entry system's heat shield is released through touchdown.

"The image sequence received so far indicates Curiosity had, as expected, a very exciting ride to the surface," said Mike Malin, imaging scientist for the Mars Science Lab mission from Malin Space Systems in San Diego. "But as dramatic as they are, there is real other-world importance to obtaining them. These images will help the mission scientists interpret the rover's surroundings, the rover drivers in planning for future drives across the surface, as well as assist engineers in their design of forthcoming landing systems for Mars or other worlds."

Image credit: NASA/JPL-Caltech/MSSS

Curiosity's Heat Shield in View
This color thumbnail image was obtained by NASA's Curiosity rover during its descent to the surface of Mars on Aug. 5 PDT (Aug. 6 EDT). The image was obtained by the Mars Descent Imager instrument known as MARDI and shows the 15-foot (4.5-meter) diameter heat shield when it was about 50 feet (16 meters) from the spacecraft. It was obtained two and one-half minutes before touching down on the surface of Mars and about three seconds after heat shield separation. It is among the first color images Curiosity sent back from Mars. The resolution of all of the MARDI frames is reduced by a factor of eight in order for them to be promptly received on Earth during this early phase of the mission. Full resolution (1,600 by 1,200 pixel) images will be returned to Earth over the next several months as Curiosity begins its scientific exploration of Mars.
The original image from MARDI has been geometrically corrected to look flat.
Curiosity landed inside of a crater known as Gale Crater.
Image credit: NASA/JPL-Caltech/MSSS

The image of the heat shield falling away is online at: http://1.usa.gov/RSVufL.
The MARDI sequence is online at: http://1.usa.gov/MZqGxv.

The MARDI camera is located on the chassis of the Curiosity rover. Just before the heat shield fell away, MARDI began its imaging task. The images selected for early downlink to Earth were taken at different points in Curiosity's final descent toward the surface. One of the earliest images shows the entry vehicle's heat shield 50 feet (15 meters) and falling away after separating from the vehicle three seconds before. A set of images demonstrates some of the gyrations Curiosity went through while on the parachute. Another remarkable set of images depicts the final moments leading up to landing, where the exhaust from four of the descent stage's 742 pounds of thrust rockets billow up dust from the Martian surface.

"A good comparison is to that grainy onboard film from Apollo 11 when they were about to land on the moon," said Malin.

Those MARDI images downlinked so far are low-resolution thumbnails, 192 by 144 pixels. In the months ahead, as communications between rover and Earth become more robust, full-frame images 1,600 by 1,200 pixels in size, are expected to provide the most complete and dramatic imagery of a planetary landing in the history of exploration.

Image Credit: NASA/JPL-Caltech/MSSS

Martian Surface Below Curiosity
This color thumbnail image was obtained by NASA's Curiosity rover during its descent to the surface of Mars on Aug. 5 PDT (Aug. 6 EDT). This image from Curiosity’s Mars Descent Imager reveals surface features including relatively dark dunes, degraded impact craters and other geologic features including small escarpments that range in size from a few feet (meters) to many tens of feet (meters) in height. The image was obtained one minute 16 seconds before touchdown. This is but one of hundreds of frames that were acquired during the descent to the surface.
The original image from MARDI has been geometrically corrected to look flat.
Curiosity landed inside of a crater known as Gale Crater.
Image Credit: NASA/JPL-Caltech/MSSS

The mission also released a higher-resolution Hazcam image of their target, the mountain in the middle of Gale Crater informally titled Mount Sharp.

Image Credit: NASA/JPL-Caltech

Behold Mount Sharp!
This image taken by NASA's Curiosity shows what lies ahead for the rover -- its main science target, Mount Sharp. The rover's shadow can be seen in the foreground, and the dark bands beyond are dunes. Rising up in the distance is the highest peak Mount Sharp at a height of about 3.4 miles, taller than Mt. Whitney in California. The Curiosity team hopes to drive the rover to the mountain to investigate its lower layers, which scientists think hold clues to past environmental change.
This image was captured by the rover's front left Hazard-Avoidance camera at full resolution shortly after it landed. It has been linearized to remove the distorted appearance that results from its fisheye lens.
Image Credit: NASA/JPL-Caltech

The new image, taken by Curiosity's black-and-white Hazard Avoidance Cameras - or Hazcams - can be found at: http://1.usa.gov/OLB3B5 .

Curiosity, NASA's latest contribution to the Martian landscape, landed at 10:32 p.m. Aug. 5, PDT, (05:32 on Aug. 6, EDT) near the foot of a mountain three miles tall inside Gale Crater, 96 miles in diameter.

Image Credit: NASA/JPL-Caltech

Looking Back at the Crater Rim
This is the full-resolution version of one of the first images taken by a rear Hazard-Avoidance camera on NASA's Curiosity rover, which landed on Mars the evening of Aug. 5 PDT (morning of Aug. 6 EDT). The image was originally taken through the "fisheye" wide-angle lens, but has been "linearized" so that the horizon looks flat rather than curved. The image has also been cropped. A Hazard-avoidance camera on the rear-left side of Curiosity obtained this image.
Part of the rim of Gale Crater, which is a feature the size of Connecticut and Rhode Island combined, stretches from the top middle to the top right of the image. One of the rover's wheels can be seen at bottom right.
Image Credit: NASA/JPL-Caltech

The mission is managed by JPL for NASA's Science Mission Directorate in Washington. The rover was designed, developed and assembled at JPL. Malin Space Science Systems, San Diego, provided MARDI, as well as three other cameras on Curiosity.

For more information on the mission, visit

http://www.nasa.gov/mars and

http://marsprogram.jpl.nasa.gov/msl

Follow the mission on Facebook and Twitter at

http://www.facebook.com/marscuriosity

http://www.twitter.com/marscuriosity

Guy Webster / DC Agle 8180-354-6278 / 818-393-9011
Jet Propulsion Laboratory, Pasadena, Calif.
guy.webster@jpl.nasa.gov / agle@jpl.nasa.gov

Dwayne Brown 202-358-1726
NASA Headquarters, Washington
Dwayne.c.brown@nasa.gov